100,00 Kč
PRODUCT ADVANTAGES RD-AL/S
DESIGN:
- inspection hole is perfectly concealed under tiles
- no facing interruption – the chinks between the door tiles fluently continue into the chinks sourounding the door
- tiling may overlap the size of the door
INSTALLATION:
- quick installation
- in the drywall partition from the front side of the frame using pre-prepared holes
- in the masonry (f.i. ytong partition) using turbo screws and pre-prepared holes on the ouside of the frame
- can be used for all thicknesses of tiles
- package consists of screws for plasterboard, turboscrews, suction cup, PVC laths (* by tile thickness 8 mm or 8 mm + 10 mm), allen key
CONSTRUCTION:
- firm peripheral frame made of aluminum alloy
- double hinge with high load bearing capacity
- if necessary doors can be easily unhinged before or after installation
- doors are universal for both left and right opening
DOOR COVERING POSSIBLE ONLY WITH PANTEM IN VERTICAL POSITION
NOT FITTED TO FIRE RESISTANCE
+[A] screws for plasterboard | [B] turbo screws | [C] suction pad | [D] PVC lath | [E] hex key
1) INSPECTION DOORS UNDER THE TILING
(PACKAGE)
2) Door built into plasterboard wall
Screw the door-frame to the plasterboard via prepared holes
3) Full wall-based installation (Ytong system etc.)
Use turbo screws to fix the doorframe to the plasterboard holes
4) Horizintal section – door slightly ajar (finished version with tiling attached)
5) Horizontal section – door fully open (finished version with tiling attached)
6)Illustration of installation (finished version with tiling attached)
SAMPLE MOUNTING PROCEDURE TYPE RD-S/AL 400×750:
Na stranách A, B, C mohou obklady přesahovat sádrokarton dvířek libovolně. Na straně D
(u pantu dvířek) jen o 15mm. Na stranách A a B rozměr rámu umožňuje využít rozmezí v založení obkladů v toleranci 40mm.
